Helium Bottle Fully Charged with Helium, Size 20CF, Used with Portable Helium Leak Detectors and Vacuum Leak Testing Supply. This compact helium bottle is designed to be used with portable helium leak detectors units. A helium regulator P105089 or similar is also required in conjunction with our Helium Spray Probe Gun Kits (P104871, P105182, or P1011211). The bottle is refillable and is shipped ready for use with helium gas inside. The bottle can be shipped back to exchange for a fully charged bottle. Please call for bottle exchange pricing (505) 872-0037. This sale is for the helium bottle charged with helium only, the helium regulator and helium spray gun are sold separately.

Helium Bottle Fully Charged with Helium, Size 40CF, Used with Portable Helium Leak Detectors and Vacuum Leak Testing Supply. This compact helium bottle is designed to be used with portable helium leak detectors units. A helium regulator P105089 or similar is also required in conjunction with our Helium Spray Probe Gun Kits (P104871, P105182, or P1011211). The bottle is refillable and is shipped ready for use with helium gas inside. The bottle can be shipped back to exchange for a fully charged bottle. Please call for bottle exchange pricing (505) 872-0037. This sale is for the helium bottle charged with helium only, the helium regulator and helium spray gun are sold separately.

Matheson Model 18 Single Stage General Purpose Brass RegulatorSEQ18, CGA-580A CGA fitting is the standardized system for the attachment of a compressed gas cylinder to the required regulator or transfer line. The three digit number, CGA (XXX), corresponds to specific gasses which that fitting is tailored for. See CGA Connection Chart.pdf in the downloads section for specific gas types compatible with this Nickel Plated Brass CGA-580 fitting.Regulator Specifications Maximum Inlet Pressure: 3000 psig (20,700 kPa) Maximum Flow Rate: 2000 CFH (944 LPM)(At 2000 psig, N2) Flow Capacity (Cv): 0.17 (without outlet valve) Operating Temperature: -20°F to 140°F (-29°C to 60°C) Porting (Regulator Body): 1/4” NPT Female Porting Configuration: 2 High, 2 Low Delivery Pressure Range: 2-50 PSIG Delivery Pressure Gauge: 0-60 PSIG Cylinder Pressure Gauge: 0-4000 PSIG This is a Matheson Single Stage Brass regulator with a 1/4 in MNPT outlet connection (with loose 1/4 in hose barb) and 1/4 in FNPT body porting. It comes equipped with 2 inch inlet and delivery pressure gauges, outlet needle valve, Neoprene seals, chrome plated brass bonnet, and a PTFE Teflon seat. This Matheson series 18, model 18 regulator is to be used in applications requiring delivery pressures up to 50 PSIG and can accept a maximum inlet pressure of 3000 PSIG. This regulator is suitable for a variety of applications that require gasses that are 99.995% or lower purity. This regulator is not suitable for any application requiring the supply of corrosive gas (non-corrosive gas applications only). Single-Stage vs. Two-StageBoth single-stage and two-stage regulators operate by reducing the pressure of gas supplied by a cylinder to an appropriate output level. The intake and delivery pressure ranges of regulators do not depend on how many stages they have, but by each regulators mechanical characteristics. When considering a single vs. a two-stage regulator there are two things to keep in mind: Droop and Supply Pressure Effect. Droop is the decrease in output pressure caused by an increase in flow rate. Supply Pressure Effect is simply the variation in delivery pressure from the cylinder to the regulator. Single Stage regulators will experience less droop with varying flow rates but a large supply pressure effect and need to be monitored and adjusted by an operator or used in applications where supply pressure will remain constant. Two-Stage regulators inherently control for variations in supply pressure while producing a constant output and therefore can be used without an operator present and in applications which require a very specific delivery pressure. The specification sheet for this series of regulator can be found in the downloadable section as a .PDF.

Ideal Vacuum Helium Spray Probe Gun in a Sturdy Carry Case for Portable Helium Leak Detectors. This Ideal Vacuum basic helium spray probe gun kit includes a10 ft flexible supply hose, a 4" rigid stainless steel probe tip, and an 8" long flexible probe tip, all packaged in a durable, foam lined storage and carrying case. This is our least expensive, no frills helium spray probe kit, designed for use in maintenance or production leak detection applications. The supply hose has a push-to-connect fitting on the gun end, and a male 1/4" NPT fitting on the other end for connection to a regulated helium supply tank hose. The probe gun requires low pressure (<10 psig) regulated helium. Helium flow is adjusted on the bottle or cylinder’s regulator. Download the Helium Spray Probe User Guide for more information.

Ideal Vacuum Regulated Helium Spray Probe Gun Kit in a Sturdy Carry Case for Portable Helium Leak Detectors. This Ideal Vacuum regulated helium spray probe gun kit includes an adustable regulator to achieve a light flow of helium (1-5 psig). This kit also includes a 10 ft flexible supply hose, a 4" rigid stainless steel probe tip, and an 8" long flexible probe tip, all packaged in a durable, foam lined storage and carrying case. This kit is designed for use in maintenance or production leak detection applications. The supply hose has a push-to-connect fitting on the gun’s regulator end, and a male 1/4" NPT fitting on the other end for connection to a regulated helium supply tank hose. Helium flow is adjusted on the bottle or cylinder’s regulator and must be less than 250 psig into the gun’s low flow adjustable regulator. Download the Helium Spray Probe User Guide for more information.

Ideal Vacuum Precise Flow Valve Regulated Helium Spray Probe Gun Kit in a Sturdy Carry Case for Portable Helium Leak Detectors. This Ideal Vacuum precise flow valve regulated helium spray probe gun kit includes a Swagelok® S series low flow metering valve with Swagelok 1/4" tube compression fittings. This precise flow valve is equipped with a vernier handle to help ensure repeatable flow adjustments. The vernier provides accurate readings to 1/25 turn. Factory flow settings are set at 4 to 10 std cm3/min with 15 psig (1.0 bar) inlet pressure. Maximum flow coefficient (Cv) is 0.004 at 10 full turns open. This kit also includes a 10 ft flexible supply hose, a 4" rigid stainless steel probe tip, and an 8" long flexible probe tip, all packaged in a durable, foam lined storage and carrying case. This kit is designed for use in maintenance or production leak detection applications. The supply hose has a Swagelok 1/4" tube compression fitting for the gun’s regulator end, and a male 1/4" NPT fitting on the other end for connection to a regulated helium supply tank hose. Helium flow is adjusted on the bottle or cylinder’s regulator and must be less than 250 psig into the gun’s precise flow valve regulator. Download the Helium Spray Probe User Guide for more information. Swagelok-TM Swagelok Company

Ideal Vacuum PREMIUM Helium Spray Gun Probe Kit with 1 Liter High Pressure Cylinder, Regulator, Refill Adapter, and Quick Connect Fittings. This Ideal Vacuum premium helium spray probe kit includes a lightweight, aluminum, refillable high pressure cylinder with an adjustable, precise output regulator. The helium flow rate can be adjusted between 0 and 0.1 Standard Liters Per Minute (SLPM) on the cylinder’s detacheable regulator (1-5 psig). The reservoir cylinder is 3” diameter x 11” tall, with a volume of 1000 cc. The cylinder has a burst pressure rating of 1800 psi. We recommend it be filled normally to about 500 psig, more than enough for numerous leak detection procedures. (Do Not Exceed the Cylinder’s Rated Pressure.) In addition to being extremely portable with its refillable cylinder, this premium helium spray gun probe kit also includes a refill adapter for refilling the cylinder from a larger helium bottle, 10 ft. flexible supply hose, a gun-mounted, 1/4 turn shutoff valve, a 4" rigid stainless steel probe tip, and an 8" long flexible probe tip, all packaged in a durable, foam lined storage and carrying case. This kit is designed for use in maintenance or production leak detection applications. The supply hose has C10 quick connect fittings on either end to connect the cylinder’s regulator to the spray gun. Download the Helium Spray Probe User Guide and the Cylinder Refilling Instruction Manual for more information.