Edwards 0.7 E2M0.7 Rotary Vane Dual Stage Mechanical Vacuum Pump, 115 VAC 1 ph. Edwards Part Number: A37141902. The Edwards 0.7 E2M0.7 dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pumping speed. The Edwards 0.7 E2M0.7 has superior vapor handling capabilities, while operating quietly. They are very reliable and have accessories to match any application. Applications Include use with Refrigeration dehydration, Brake line evacuation, Epoxy degassing, Sterilization, Mass spectrometry, Vacuum ovens, Lasers, Backing combinations, Thin film coating, Vacuum distillation, Freeze drying, Space research and other vacuum processes. The Edwards 0.7 E2M0.7 vacuum pumps have a pumping speed displacement at 60Hz of 0.5 CFM and an ultimate pressure of 1.1 X 10 -3 Torr. These Edwards 0.7 E2M0.7 Rotary Vane Mechanical Vacuum Pumps with Edwards part number A37141902.

Edwards 0.7 E2M0.7 Rotary Vane Dual Stage Mechanical Vacuum Pump, 230 VAC. Edwards Part Number A37141919. The Edwards 0.7 E2M0.7 dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pumping speed. The Edwards 0.7 E2M0.7 has superior vapor handling capabilities, while operating quietly. They are very reliable and have accessories to match any application. Applications Include use with refrigeration dehydration, brake line evacuation, Epoxy degassing, Sterilization, Mass spectrometry, Vacuum ovens, Lasers, Backing combinations, Thin film coating, Vacuum distillation, Freeze drying, Space research and other vacuum processes. The Edwards 0.7 E2M0.7 vacuum pumps have a pumping speed displacement at 60Hz of 0.5 CFM and an ultimate pressure of 1.1 X 10-3 Torr. These Edwards 0.7 E2M0.7 rotary vane mechanical vacuum pumps have vendor part number A37141919.

Edwards Micromeritics 0.7 E2M0.7 Rotary Vane Dual Stage Mechanical Vacuum Pump, 230 VAC. Edwards Part Number A371-42-919. The Edwards Micromeritics vacuum pumps are used to degas and analyze samples, and to prepare samples for surface area and pore volume analysis. Micromeritics systems use rotary-vane oil forepumps (wet pumps) for degassing and analysis. The Micromeritics E2M0.7 pumps differ from the standard E2M0.7 pumps as follows: The Micromeritics E2M0.7 pumps are supplied with a sealed exhaust assembly fitted to the outlet port of the pump. You must remove the sealed exhaust assembly from the outlet port before commissioning the pump. Comes with oil and all the parts for conversion. You must use the Edwards Ultragrade 15 oil (supplied) as recommended in Section 2.5 of the corresponding pump instruction manual. The amendment PDF on Downloads describes the installation, operation and maintenance for the E2M0.7 rotary vane pumps for Micromeritics. The Edwards 0.7 E2M0.7 dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pumping speed. The Edwards 0.7 E2M0.7 has superior vapor handling capabilities, while operating quietly. They are very reliable and have accessories to match any application. Applications Include use with Refrigeration dehydration, Brake line evacuation, Epoxy degassing, Sterilization, Mass spectrometry, Vacuum ovens, Lasers, Backing combinations, Thin film coating, Vacuum distillation, Freeze drying, Space research and other vacuum processes. The Edwards 0.7 E2M0.7 vacuum pumps have a pumping speed displacement at 60Hz of 0.5 CFM and an ultimate pressure of 1.1 X 10-3 Torr. These Edwards 0.7 E2M0.7 Rotary Vane Mechanical Vacuum Pumps have a product number A37142919.

Edwards 1.5 E2M1.5 Rotary Vane Dual Stage Mechanical Vacuum Pumps, 115 VAC. Edwards Part Number A37132902. The Edwards 1.5 E2M1.5 dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pumping speed. The Edwards 1.5 E2M1.5 has superior vapor handling capabilities, while operating quietly. They are very reliable and have accessories to match any application. Applications Include use with Refrigeration dehydration, Brake line evacuation, Epoxy degassing, Sterilization, Mass spectrometry, Vacuum ovens, Lasers, Backing combinations, Thin film coating, Vacuum distillation, Freeze drying, Space research and other vacuum processes. The Edwards 1.5 E2M1.5 vacuum pumps have a pumping speed displacement at 60Hz of 1.2 CFM and an ultimate pressure of 1.1 X 10 -3 Torr. These Edwards 1.5 E2M1.5 Rotary Vane Mechanical Vacuum Pumps has Edwards Product Number A37132902.

Edwards 1.5 E2M1.5 Rotary Vane Dual Stage Mechanical Vacuum Pump, 230 VAC 1 ph. Edwards Part Number A37132919. The Edwards 1.5 E2M1.5 dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pumping speed. The Edwards 1.5 E2M1.5 has superior vapor handling capabilities, while operating quietly. They are very reliable and have accessories to match any application. Applications include use with Refrigeration dehydration, Brake line evacuation, Epoxy degassing, Sterilization, Mass spectrometry, Vacuum ovens, Lasers, Backing combinations, Thin film coating, Vacuum distillation, Freeze drying, Space research and other vacuum processes. The Edwards 1.5 E2M1.5 vacuum pumps have a pumping speed displacement at 60Hz of 1.2 CFM and an ultimate pressure of 1.1 X 10-3 Torr. These Edwards 1.5 E2M1.5 Rotary Vane Mechanical Vacuum Pumps has Edwards Part Number A37132919.

Edwards Ultra Grade 19 Vacuum Pump Oil, 1 Liter (~1 Quart), Edwards Mechanical Pump Oil Ultragrade. Edwards Part Number: H11025015. Edwards Ultra Grade 19 (sold here by the Liter H11025015) is quality mechanical vacuum pump oil for the ultimate performance of your Edwards Rotary Vane pumps. Edwards Ultra Grade 19 is specially prepared by Edwards to meet the Rotary Vane exclusive specifications. We recommend that you change your vacuum pump oil at least every 3 months to prolong the life of your vacuum pump.Edwards Mechanical Pump Oil Ultragrade, Designed for Edwards Rotary Vane Pumps:RV3, RV5, RV8, RV12E-lab 2, Speedivac 2E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28, & E2M30 Vacuum Pumps

Edwards AC Power Cable for RV3, RV5, RV8, RV12, E2M0.7 E2M1.5 & D-Labs Vacuum Pumps, 3m Long. This is a 3m long power cable for RV3, RV5, RV8, RV12, XDS5, XDS10, E2M0.7, E2M1, E2M1.5, E2M2 and Dlab Edwards Vacuum Pumps. 115 Vac.

NEW Edwards EMF3 (EMF-3) Oil Mist Exhaust Filter, KF10 Ports, Designed for Edwards for Speedivac 2, E2M0.7, E2M1, E2M1.5, E2M2 Vacuum Pumps (Edwards Part Number A462-20-000) This EMF3 (EMF-3) Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M2. This Edwards EMF3 (EMF-3) exhaust filter assembly is supplied with NW10 clamp, centering ring, O-Ring, NW10 to 3/4 BSP adapter, 1 oil element filter and 1 odor element. The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens. This filter is very efficient at 99.999% DOP test and is also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website. For complete specifications download instruction manual (see below avaliable below). Edwards EMF3 (EMF-3) Oil Mist Filter Specifications: Fits Pump Models: Speedivac 2, E2M0.7, E2M1, E2M1.5, E2M2 Inlet & Exhaust Flanges: ISO KF10 (NW10) Dimensions: Height 5.5 x Width 3.25 inches Weight: 1 lb Material: Durable Plastic Body Oil Filter Element: Epoxy Impregnated Glass Fiber Replacement Oil Filter Part Number: A223-04-197 Edwards EMF3 (EMF-3) Part Number: A462-20-000

NEW Replacement Spare Odor Removal Element for Edwards EMF3 (EMF-3) Oil Mist Eliminators (Edwards Odor Removal Element Part Number A223-04-081) This is a replacement oil mist odor removal element for the Edwards EMF3 oil mist eliminator. Edwards EMF3 (EMF-3) oil mist eliminator part number is A462-20-000. For complete specifications on EMF3 oil mist eliminators download instruction manual (see below avaliable downloads). Odor Removal Filter Element Specifications: For Pump Models: Speedivac, E2M0.7, E2M1, E2M1.5, and sometimes on E2M2 Dimensions: Diameter: 1-5/8 x Height 1-3/8 inches Weight: 12 oz Material: Activated Carbon Edwards Part Number: A223-04-081

NEW Replacement Spare Oil Mist Element for Edwards EMF3 (EMF-3)Oil Mist Eliminators (Edwards Oil Mist Element Part Number A223-04-197) This is a replacement oil mist element for the Edwards EMF3 oil mist eliminator. Edwards EMF3 (EMF-3) oil mist eliminator part number is A462-20-000. For complete specifications on EMF20 (EMF-20) oil mist eliminators download instruction manual (see below avaliable download). Oil Mist Eliminators Removal Filter Element Specifications: For Use With: Edward EMF3 (EMF-3) Oil Mist Eliminator For Pump Models: Speedivac, E2M0.7, E2M1, E2M1.5, and sometimes on E2M2 Dimensions: Diameter 1-5/8 x Height 2 inches Weight: 1 lb. Material: Epoxy Impregnated Borosilicate Glass Fiber Edwards Part Number: A223-04-197

Hinge Clamp KF-10, KF-16 Vacuum Fittings, ISO-KF Flange Size NW-10, NW-16, AluminumThese KF-10, KF-16 Hinge Clamp vacuum fittings follow ISO-KF standards and have a flange size of NW-10, NW-16. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of Aluminum.KF-10, KF-16 Hinge ClampISO-KF Flange Size: NW-16Common Dimensions: A=2.45" (62.30mm)B=1.61" (41mm)C=0.649" (16.5mm)

Centering Ring KF-10 Vacuum Fittings, ISO-KF Flange Size NW-10, Stainless Steel & Viton® O-Ring These KF-10 Centering Ring vacuum fittings follow ISO-KF standards and have a flange size of NW-10. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant Stainless Steel with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers. KF-10 Centering Ring with Viton® O-Ring ISO-KF Flange Size: NW-10

Ideal Vacuum XactGauge Convection-Enhanced Pirani Gauge Kit, XGC-320 Controller, XGC-321 KF-16 Gauge, 10 ft. Sensor Cable, PS, 2 Set Points Complete Kit Includes: XactGauge XGC-320 Convection-Enhanced Controller, XGC-321 KF-16 Sensor Gauge, 3 m (10 ft.) Sensor Cable & Power Supply. Features: Inexpensive solution for Pirani type thermal conductivity gauges Convection-Enhanced Pirani sensor gauges available in 8 different flange sizes Accurate pressure measurements from 1x10-4 to 1000 Torr Compact 1/8-DIN package fits on bench or in instrument panel cutout Bright, easy to read, 4 digit OLED display Intuitive front panel controls for calibration and parameter adjustments Switch between Torr, mBar and Pa units quickly Serial RS232/RS485 DB9 I/O interface for remote control 2 set points 4 analog outputs Compatible with Granville-Phillips® 275 Convectron® and Inficon PGE050 Pirani Gauge Enhanced sensors and cables. The Ideal Vacuum XactGauge XGC-320 Convection Enhanced Pirani Gauge Controller is an inexpensive solution for simple readout of Pirani type thermal conductivity gauges with added features for ease of use and system integration. Use with any of our eight (8) XactGauge Enhanced Pirani Sensor Gauges to obtain accurate pressure measurements ranging from 1x10-4 to 1000 Torr. Our XactGauge XGC-320 Controller, conveniently housed in a compact 1/8-DIN enclosure, can be used on your benchtop or mounted in an instrument panel cutout. The bright, OLED 4 digit display is easy to read. Intuitive front panel controls allow direct gauge calibration and simple adjustment of vacuum measurement parameters. The XactGauge XGC-320 Convection-Enhanced Pirani Gauge Controller is powered by user supplied 12 to 28 VDC, 2 W, or by our XactGauge Enhanced Pirani Controller power supply. The XGC-320 Controller has a serial RS232/RS485 (DB-9) remote I/O interface, two (2) setpoints, and four (4) analog relay outputs, each rated at 1 A at 30 VDC. This XGC-320 Controller is compatible with other manufacturer’s Pirani type gauges and cables, including the Granville-Phillips® 275 Convectron® and the Inficon PGE050 Pirani Gauge Enhanced. Thermal conductivity gauges measure pressure indirectly by sensing the loss of heat from a sensor to the surrounding gas. The higher the pressure of the gas, the more heat is conducted away from the sensor. Pirani thermal conductivity gauges maintain a sensor (usually a wire) at a constant temperature and measure the current or power required to maintain that temperature. A standard Pirani gauge has a useful measuring range of about 10-4 Torr to 10 Torr. Convection-enhanced Pirani gauges take advantage of the convection current inside the sensor to extend the pressure measurement range to just above atmosphere. The XactGauge is supplied factory calibrated using Nitrogen (N2) gas. When measuring gasses other than Nitrogen/Air, accurate correction must be made for the difference in thermal conductivity between nitrogen and the gas in use, particularly at pressures above 1 Torr. DO NOT USE for explosive, corrosive or toxic gasses.