Ideal Vacuum Cube Hardware Kit For 6 x 6 x 6 Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 6 x 6 x 6 chamber. The 6 x 6 x 6 Cube frame takes six 9" x 9" plates to complete it (P106861). This kit includes O-rings for all the 6 x 6" plates and the 1/4"-20 x 5/16" long stainless steel socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of six 6" x 6" Cube plate O-rings and 8 spare plate mounting screws. This 6 x 6 x 6 Cube hardware kit includes: (12 ea) Viton O-ring for 6 x 6 Cube Plate, P107295 (includes 6 spares) (56 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 8 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Hardware Kit For 6 x 12 x 12 Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 6 x 12 x 12 chamber. The 6 x 12 x 12 Cube frame takes four 6" x 12" and two 12" x 12" plates to complete it (P108364). This kit includes O-rings for all the plates and the 1/4"-20 x 5/16" long stainless steel socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of four 6" x 12" and two 12" x 12" Cube plate O-rings, and 16 spare plate mounting screws. This 6 x 12 x 12 Cube hardware kit includes: (8 ea) Viton O-ring for 6 x 12 Cube Plate, P108339 (includes 4 spares) (4 ea) Viton O-ring for 12 x 12 Cube Plate, P108428 (includes 2 spares) (96 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 16 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Hardware Kit For 6 x 6 x 6 Hexagonal Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 6 x 6 x 6 hexagonal chamber. The 6 x 6 x 6 hexagonal Cube frame takes eight 6" x 6" plates to complete it (P108699). This kit includes O-rings for all the 6 x 6" plates and the 1/4"-20 x 5/16" long stainless steel socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of eight 6" x 6" Cube plate O-rings and 8 spare plate mounting screws. This 6 x 6 x 6 hexagonal Cube hardware kit includes: (16 ea) Viton O-ring for 6 x 6 Cube Plate, P107295 (includes 8 spares) (72 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 8 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Hardware Kit For 9 x 9 x 9 Chamber, Includes Viton O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a custom 9 x 9 x 9 chamber. The 9 x 9 x 9 Cube aluminum frame takes six 9" x 9" plates to complete it (P109589). The kit includes O-rings for all the 9 x 9 plates and enough 1/4"-20 x 5/16" long stainless steel, plate mounting, socket head cap screws (SHCS) to complete the 9 x 9 x 9 Cube chamber. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of six 9" x 9" Cube plate O-rings and 8 spare plate mounting screws. This 9 x 9 x 9 Cube hardware kit includes: (12 ea) Viton O-ring for 9 x 9 Cube Plate, P1010490 (includes 6 spares) (56 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 8 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube High-Temperature Chemical-Resistant Hardware Kit for 6 x 6 x 6 Chamber, Includes Kalrez O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit has Kalrez O-rings, needed when constructing a high temperature and chemical resistant 6 x 6 x 6 chamber. The 6 x 6 x 6 Cube frame takes six 9" x 9" plates to complete it (P106861). This kit includes Kalrez O-rings for all the 6 x 6" plates and the 1/4"-20 x 5/16" long stainless steel socket head cap screws (SHCS) needed to mount the plates on the frame. Kalrez O-rings can be baked up to 275° C. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Note: Making use of the high-temperature capabilities of these Kalrez o-ring replacement kits will require the use of uncoated, bare-metal 6 x 6 plates. The blue powder coated plates will not withstand repeated exposure to temperatures above 150° C without fading and discoloration. It is also suggested to use anti-seize lubricant, such as Loctite LB 8009 (P109024) on the mounting screws to keep them from galling. This kit also includes a 8 spare plate mounting screws. This high temperature and chemical resistant 6 x 6 x 6 Cube hardware kit includes: (6 ea) Kalrez O-ring for 6 x 6 Cube Plate (56 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 8 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Hardware Kit For 6 x 6 x 12 Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 6 x 6 x 12 chamber. The 6 x 6 x 12 Cube frame takes four 6" x 12" and two 6" x 6" plates to complete it (P107541). This kit includes O-rings for all the plates and the 1/4"-20 x 5/16" long stainless steel socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of four 6" x 12" and two 6" x 6" Cube plate O-rings, and 12 spare plate mounting screws. This 6 x 6 x 12 Cube hardware kit includes: (8 ea) Viton O-ring for 6 x 12 Cube Plate, P108339 (includes 4 spares) (4 ea) Viton O-ring for 6 x 6 Cube Plate, P107295 (includes 2 spares) (76 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 16 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Hardware Kit For 6 x 6 x 12 Hexagonal Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 6 x 6 x 12 hexagonal chamber. The 6 x 6 x 12 hexagonal Cube frame takes six 6" x 12" and two 6" x 6" plates to complete it (P108697). This kit includes O-rings for all the plates and the 1/4"-20 x 5/16" long stainless steel socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of six 6" x 12" and two 6" x 6" Cube plate O-rings, and 12 spare plate mounting screws. This 6 x 6 x 12 hexagonal Cube hardware kit includes: (12 ea) Viton O-ring for 6 x 12 Cube Plate, P108339 (includes 6 spares) (4 ea) Viton O-ring for 6 x 6 Cube Plate, P107295 (includes 2 spares) (100 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 12 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Hardware Kit For 12 x 12 x 12 Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 12 x 12 x 12 chamber. The 12 x 12 x 12 Cube frame takes six 12 x 12" plates to complete it (P107540). This kit includes O-rings seals for all the 12 x 12 plates and the 1/4"-20 x 5/16" long stainless steel, socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150°C. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of six 12" x 12" Cube plate O-rings and 16 spare plate mounting screws. This 12 x 12 x 12 Cube hardware kit includes: (12 ea) Viton O-ring for 12x12 Cube Plate, P108428 (includes 6 spares) (96 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 16 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Hardware Kit For 24 x 24 x 24 Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 24 x 24 x 24 chamber. The 24 x 24 x 24 Cube welded stainless steel frame with door takes twenty 12 x 12" plates to complete it (P108734). This kit includes O-rings for all the 12 x 12 plates and the 1/4"-20 x 5/16" long stainless steel, plate socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of twenty 12" x 12" Cube plate O-rings and 16 spare plate mounting screws. This 24 x 24 x 24 Cube hardware kit includes: (40 ea) Viton O-ring for 12x12 Cube Plate, P108428 (includes 20 spares) (336 ea) 1/4"-20 x 5/16" long SHCS screws for Plate Mounting, P1013341 (includes 16 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

1/4-20 x 5/16 in. Socket Head Cap Screws (SHCS), 1/4-20 Thread Size by 5/16 in. Long, 304 Stainless Steel 1 Each. Used to mount all Ideal Vacuum Cube Plates. These 1/4-20 x 5/16-inch socket head cap screws (SHCS) have a diameter of 1/4 inch, with 20 threads per inch, and are 5/16 inch long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. These 1/4-20 x 5/16 long hex screws are used on all Ideal Vacuum Cube plates. Buy a few as spares in case one gets lost or boogered up. 1/4-20 x 5/16-inch socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: 1/4 inch Thread count: 20 TPI Length: 5/16 inch Thread direction: Right hand Drive size: 3/16" Units: US We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

1/4-20 x 1/4" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 1/4" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 1/4" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

1/4-20 x 5/16" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 5/16" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 5/16" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

1/4-20 x 3/8" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 3/8" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 3/8" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

Bolt Kit For 1.33 In. Conflat Tapped Bolt Hole Flanges, Silver-Plated Allen Bolts With Washers.These bolt kits contain silver-plated Allen head bolts and washers to fasten tapped hole 1.33 (1-1/3) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.Complete Kit - 1.33 (1-1/3) inch Conflat Tapped Bolt Hole Fasteners: QTY 6, Silver-Plated 8-32 x 0.50 Inch Long Allen Bolts QTY 6, Washers

Bolt Kit For 2.75 (2-3/4) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated Allen Bolts With Washers.These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 2.75 (2-3/4) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.Complete Kit - 2.75 (2-3/4) inch Conflat Tapped Bolt Hole Fasteners: QTY 6, Silver-Plated 1/4-28 x 0.875 Inch Long 12-Point Head Bolts QTY 6, Washers

Bolt Kit for Ideal Vacuum Cube Plates with CF 3.375 or 4.5 Conflat Port, Eight Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 3.375 or 4.5 port with tapped bolt threads. The kit consists of eight (8) silver-plated, 12-point bolts, 5/16-24 x 1.0, and eight (8) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 8 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 8 ea. 304 stainless steel washers

Bolt Kit for Ideal Vacuum Cube Plates with CF 6.0 Conflat Port, Sixteen Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 6.0 port with tapped bolt threads. The kit consists of sixteen (16) silver-plated, 12-point bolts, 5/16-24 x 1.0, and sixteen (16) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 16 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 16 ea. 304 stainless steel washers

Bolt Kit for Ideal Vacuum Cube Plates with CF 8.0 Conflat Port, Twenty Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 8.0 port with tapped bolt threads. The kit consists of twenty (20) silver-plated, 12-point bolts, 5/16-24 x 1.0, and twenty (20) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 20 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 20 ea. 304 stainless steel washers

Bolt Kit for Ideal Vacuum Cube Plates with CF 10.0 Conflat Port, Twenty-Four Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 10.0 port with tapped bolt threads. The kit consists of twenty-four (24) silver-plated, 12-point bolts, 5/16-24 x 1.0, and twenty-four (24) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 20 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 20 ea. 304 stainless steel washers