HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 1.33 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 1.33” (DN16) Bolt Down Flange with 8-32 UNC Threads. HVA Part Number: 11220-0060. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 1.33 inch (DN16) vacuum flange with 8-32 UNC blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-0060. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. They do not include position sensors due to their size. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 2.75 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 2.75” (DN35) Bolt Down Flange with 1/4-28 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-0150R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 2.75 inch (DN35) vacuum flange with 1/4-28 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-0150R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 3.375 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 3.375” (DN50) Bolt Down Flange with 5/16-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-0200R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 3.375 inch (DN50) vacuum flange with 5/16-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-0200R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 4.5 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 4.5” (DN63) Bolt Down Flange with 5/16-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-0250R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 4.5 inch (DN63) vacuum flange with 5/16-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-0250R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 6.0 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 6.0” (DN100) Bolt Down Flange with 5/16-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-0400R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 6.0 inch (DN100) vacuum flange with 5/16-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-0400R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 6.0 in. Flange, METRIC THREADS, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 6.0” (DN100) Bolt Down Flange with M8 x 1.25 METRIC THREADS. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11210-0404R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 6.0 inch (DN100) vacuum flange with M8 x 1.25 metric blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11210-0404R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 8.0 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 8.0” (DN150) Bolt Down Flange with 5/16-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-0600R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 8.0 inch (DN150) vacuum flange with 5/16-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-0600R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 10.0 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 10.0” (DN200) Bolt Down Flange with 5/16-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-0800R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 10.0 inch (DN200) vacuum flange with 5/16-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-0800R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. These pneumatically operated valves include 1/4" OD tubing push-to-connect fittings. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 12.0 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 12.0” (DN250) Bolt Down Flange with 5/16-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-1000R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 12.0 inch (DN250) vacuum flange with 5/16-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-1000R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 13.25 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 13.25” (DN275) Bolt Down Flange with 3/8-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-1070R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 13.25 inch (DN275) vacuum flange with 3/8-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-1070R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

HVA Ultra-High Vacuum UHV Pneumatic Gate Valve Conflat CF 14.0 in. Flange, Viton Gate and OFHC Copper Bonnet Seals, 304 Stainless Steel. Conflat CF 14.0” (DN300) Bolt Down Flange with 3/8-24 UNF Threads. Includes Built-In Reed Switch Position Indicators. HVA Part Number: 11220-1200R. These HVA brand pneumatically operated series 11000 gate valves are made in the U.S.A and have a Conflat CF 14.0 inch (DN300) vacuum flange with 3/8-24 UNF blind-tapped holes. They are rated for ultra-high vacuum (UHV) and follow vacuum technology standards for knife-edge flanges as described in ISO 3669:2020. HVA Part Number: 11220-1200R. HVA pneumatically operated ultra-high vacuum gate valves feature a positive lock-over center mechanism which keeps the valve locked closed during loss of power or air pressure. Gate seals are made of Viton fluoroelastomer (FKM) material. Bonnet seals are made of OFHC Copper. Bellows are welded to the bonnet for leak-free operation. These valves are made with corrosion resistant 304 stainless-steel gates and valve bodies and have a typical life of 100,000 cycles (depending on the process) before needing service. HVA valve bodies have one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C at 1x10-6 Torr using a proprietary process which ensures maximum joint integrity, minimizes outgassing during operation, eliminates the possibility of virtual leaks or entrapment areas, and minimizes body distortion found in conventionally welded valves. HVA gate valves with Conflat CF flanges are rated for ultra-high vacuum applications and can attain ultimate pressures in the 10-10 Torr range due to the metal-to-metal bonnet seal. HVA gate valves have a helium leak rate of 1.5 x 10-10 Torr l/sec and are bakeable to 200 °C with the valve open, or 150 °C with the valve closed. Open and closed position sensors are built into the pneumatic actuator and are standard on all HVA pneumatic gate valves. These on/off switches can be used to activate indicator lights or used to control a more complex or automated vacuum protection system. Solenoids for pneumatic valves are available in 24 VDC and 120 VAC varieties and are sold separately. Repair kits are available for all HVA gate valves we carry. HVA gate valves are available in high vacuum and ultra-high vacuum varieties in the following sizes: Quick flanged sizes KF-16, KF-25, KF-40, and KF-50 ISO LF flanged ISO-63, -100, -160, -200, -250, -320, -400, and -500 sizes ASA ANSI sizes 2, 4, and 6 inch sizes Conflat (CF) 1.33 , 2.75, 3.375, 4.5, 6, 8, 10, 12, 13.25, and 14 inch sizes The installation manual and operating instructions are available in the downloads.

Bolt Kit For 2.75 (2-3/4) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated Allen Bolts With Washers.These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 2.75 (2-3/4) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.Complete Kit - 2.75 (2-3/4) inch Conflat Tapped Bolt Hole Fasteners: QTY 6, Silver-Plated 1/4-28 x 0.875 Inch Long 12-Point Head Bolts QTY 6, Washers

Bolt Kit For 3.375 (3-3/8) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Head Bolts With Washers. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 3.375 (3-3/8) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 3.375 (3-3/8) inch Conflat Tapped Bolt Hole Fasteners: QTY 8, Silver-Plated 5/16-24 x 1.25 Inch Long 12-Point Head Bolts QTY 8, Washers

Bolt Kit For 1.33 In. Conflat Tapped Bolt Hole Flanges, Silver-Plated Allen Bolts With Washers.These bolt kits contain silver-plated Allen head bolts and washers to fasten tapped hole 1.33 (1-1/3) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.Complete Kit - 1.33 (1-1/3) inch Conflat Tapped Bolt Hole Fasteners: QTY 6, Silver-Plated 8-32 x 0.50 Inch Long Allen Bolts QTY 6, Washers

Bolt Kit For 4.5 (4-1/2) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Head Bolts With Washers. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 4.50 (4-1/2) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 4.50 (4-1/2) inch Conflat Tapped Bolt Hole Fasteners: QTY 8, Silver-Plated 5/16-24 x 1.25 Inch Long 12-Point Head Bolts QTY 8, Washers

Bolt Kit For 6.00 (6) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Head Bolts With Washers. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 6.00 (6) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 6.00 (6) inch Conflat Tapped Bolt Hole Fasteners: QTY 16, Silver-Plated 5/16-24 x 1.25 Inch Long 12-Point Head Bolts QTY 16, Washers

Bolt Kit For 8.00 (8) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Head Bolts With Washers. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 8.00 (8) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 8.00 (8) inch Conflat Tapped Bolt Hole Fasteners: QTY 20, Silver-Plated 5/16-24 x 1.75 Inch Long 12-Point Head Bolts QTY 20, Washers

Bolt Kit For 10.00 (10) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Head Bolts With Washers. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 10.00 (10) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450oC for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 10.00 (10) inch Conflat Tapped Bolt Hole Fasteners: QTY 24, Silver-Plated 5/16-24 x 1.75 Inch Long 12-Point Head Bolts QTY 24, Washers

Bolt Kit For 10.00 (10) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Head Bolts with Washers, 32 each. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 12.00 (12) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450oC for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 12.00 (12) inch Conflat Tapped Bolt Hole Fasteners: QTY 32, Silver-Plated 5/16-24 x 3.0 inch Long 12-Point Head Bolts QTY 32, Washers

Bolt Kit for 13.25 and 14 in. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Bolts with Washers, 30 each. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 13.25 and 14 inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450oC for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 13.25 and 14 inch Conflat Tapped Bolt Hole Fasteners: QTY 30, Silver-Plated 3/8-24 x 3.0 inch Long 12-Point Head Bolts QTY 30, Washers

Bolt Kit for 16.50 in. Conflat Tapped Bolt Hole Flanges, Silver-Plated 12-Point Bolts with Washers, 36 each. These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 16.50 inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450oC for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Complete Kit - 16.50 inch Conflat Tapped Bolt Hole Fasteners: QTY 36, Silver-Plated 3/8-24 x 3.0 inch Long 12-Point Head Bolts QTY 36, Washers

Conflat Flange (CFF) Copper Gaskets CF Size 2-3/4" These conflat copper conflat gaskets fit a conflat flange size of 2-3/4 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½ , in Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Copper Gaskets CF Size 2-3/4" - 1 eachCF Flange Size: CF 2-3/4 inch Common Dimensions: Flange Outer Diameter (OD) 2-3/4", Gasket Outer Diameter (OD) 1.895", Gasket Inner Diameter (ID) 1.451"

Conflat Flange (CFF) Copper Gaskets CF Size 4-1/2" These conflat copper conflat gaskets fit a conflat flange size of 4-1/2 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Copper Gaskets CF Size 4-1/2" - 1 eachCF Flange Size: CF 4-1/2 inch Common Dimensions: Flange Outer Diameter (OD) 4-1/2", Gasket Outer Diameter (OD) 3.243", Gasket Inner Diameter (ID) 2.506"

Conflat Flange (CF) Copper Gaskets CF Size 6 These conflat copper conflat gaskets fit a conflat flange size of 6 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Copper Gaskets CF Size 6 - 1 eachCF Flange Size: CF 6 inch Common Dimensions: Flange Outer Diameter (OD) 6, Gasket Outer Diameter (OD) 4.743, Gasket Inner Diameter (ID) 4.010

Conflat Flange (CF) Copper Gaskets CF Size 8, CF Flange 8.0 inch. These conflat copper conflat gaskets fit a conflat flange size of 8 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½ , in Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.Conflat Flange (CF) Copper Gaskets CF Size 8 - 1 eachCF Flange Size: CF 8 inch Common Dimensions: Flange Outer Diameter (OD) 8, Gasket Outer Diameter (OD) 6.743, Gasket Inner Diameter (ID) 6.007

Conflat Flange (CF) Copper Gaskets CF Size 10", CF Flange 10.0 inch. These conflat copper conflat gaskets fit a conflat flange size of 10 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½ , in Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.Conflat Flange (CF) Copper Gaskets CF Size 10" - 1 eachCF Flange Size: CF 10 inch Common Dimensions: Flange Outer Diameter (OD) 10", Gasket Outer Diameter (OD) 8.743", Gasket Inner Diameter (ID) 8.007"

Conflat Flange (CF) Copper Gaskets CF Size 12 - 1 each These conflat copper conflat gaskets fit a conflat flange size of 12 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.Conflat Flange (CF) Copper Gaskets CF Size 12 - Quantity 1CF Flange Size: CF 12 inch Common Dimensions: Flange Outer Diameter (OD) 12, Gasket Outer Diameter (OD) 10.743, Gasket Inner Diameter (ID) 10.00

Conflat Flange (CF) Copper Gaskets CF Size 13-1/4 - 1 each These conflat copper conflat gaskets fit a conflat flange size of 13-1/4 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½, in Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Copper Gaskets CF Size 13-1/4 - Quantity 1CF Flange Size: CF 13-1/4 inch Common Dimensions: Flange Outer Diameter (OD) 13-1/4, Gasket Outer Diameter (OD) 11.55, Gasket Inner Diameter (ID) 10.84

Conflat Flange (CF) Copper Gaskets CF Size 14 These conflat copper conflat gaskets fit a conflat flange size of 14 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½ , in Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.Conflat Flange (CF) Copper Gaskets CF Size 14 - Quantity 1CF Flange Size: CF 14 inch Common Dimensions: Flange Outer Diameter (OD) 14, Gasket Outer Diameter (OD) 12.31, Gasket Inner Diameter (ID) 11.8

CF 2.75, 1.5 in. Gate and Bonnet Kit, Viton, for HVA, Manual and Pneumatic Gate Valves. HVA Part Number: KSB15M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 2.75 inch CF Conflat gate valves, models 11120-0150 and 11222-0150R. Please download the installation instructions.

CF 3.375, 2 in. ID Gate and Bonnet Kit, Viton, for Ideal Vacuum UltraLock or HVA, Manual and Pneumatic Gate Valves. HVA Part Number: KSB20M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 2.75 inch CF Conflat gate valves, models 11120-200 and 11222-200R. Please download the installation instructions.

CF 4.50, 2.5 in. ID Gate and Bonnet Kit, Viton, for HVA, Manual and Pneumatic Gate Valves. HVA Part Number: KSB25M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 4.50 inch CF Conflat gate valves, models 11120-0250 and 11222-0250R. Please download the installation instructions.

CF 6.00, 4.0 in. ID Gate and Bonnet Kit, Viton, for HVA Manual and Pneumatic Gate Valves. HVA Part Number: KSB40M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 6.00 inch CF Conflat gate valves, models 11120-0400 and 11222-0400R. Please download the installation instructions.

CF 8.00, 6.0 in. ID Gate and Bonnet Kit, Viton, for HVA, Manual and Pneumatic Gate Valves. HVA Part Number: KSB60M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 8.00 inch CF Conflat gate valves, models 11120-0600 and 11222-0600R. Please download the installation instructions.

CF 8.00, 6.0 in. ID Gate and Bonnet Kit, AFLAS, for HVA Manual and Pneumatic Gate Valves. HVA Part Number: KSB60MAF. This is an 11000 series HVA gate valve repair kit with copper bonnet and AFLAS o-ring seal. Rated for UHV. AFLAS (TFE/P) can withstand higher temperatures than Viton (up to 220 °C / 450 °F ) and has superior amine resistance. This kit fits both the manual and pneumatic HVA 8.00 inch CF Conflat gate valves, models 11120-0600 and 11222-0600R. Please download the installation instructions.

CF 8.00, 6.0 in. ID Gate and Bonnet Kit, KALREZ, for HVA Manual and Pneumatic Gate Valves. HVA Part Number: KSB60MA. This is an 11000 series HVA gate valve repair kit with copper bonnet and KALREZ o-ring seal. Rated for UHV. KALREZ (FFKM) can withstand the highest temperature of any vacuum seal elastomer (up to 315 °C / 600 °F). This kit fits both the manual and pneumatic HVA 8.00 inch CF Conflat gate valves, models 11120-0600 and 11222-0600R. Please download the installation instructions.

CF 10.00, 8.0 in. ID Gate and Bonnet Kit, Viton, for HVA, Manual and Pneumatic Gate Valves. HVA Part Number: KSB80M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 10.00 inch CF Conflat gate valves, models 11120-0800 and 11222-0800R. Please download the installation instructions.

CF 12.00, 10.0 in. ID Gate and Bonnet Kit, Viton, for HVA Manual and Pneumatic Gate Valves. HVA Part Number: KSB100M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 12.00 inch CF Conflat gate valves, models 11120-1000 and 11222-1000R. Please download the installation instructions.

CF 14.00, 12.0 in. ID Gate and Bonnet Kit, Viton, for HVA Manual and Pneumatic Gate Valves. HVA Part Number: KSB120M. This is an 11000 series HVA gate valve repair kit with copper bonnet and Viton o-ring seal. Rated for UHV. This kit fits both the manual and pneumatic HVA 14.00 inch CF Conflat gate valves, models 11120-1200 and 11222-1200R. Please download the installation instructions.

Solenoid Kit for HVA Pneumatic Gate Valve, 110-120 VAC, Includes Mounting Bracket. This solenoid kit is for use with a HVA pneumatically operated gate valve. The solenoid operates the gate valve’s pneumatic piston. All fittings and connections must be leak-tight to ensure proper operation. These 110-120 VAC solenoid kits include a Humphrey 410 series, 4-way, direct-acting solenoid valve, and everything else needed to operate an UltraLock or HVA pneumatic gate valve including air line tubing push-to-connect fittings. For faster actuation of larger gate valves, larger tubing and different push-to-connect fittings may be used. Kit Components: 410 series 4-way solenoid valve. Mounting bracket for use with HVA pneumatic gate valves. Four (4) 4 mm OD tubing push-to-connect to 1/8" male universal pipe thread adapters. 4’ length of 4 mm OD flexible polyurethane tubing. Solenoid Valve Features: 110/120 VAC, 50/60 Hz, 4.5 W. 125 PSIG maximum input pressure. 80 PSIG required for most pneumatic gate valves. Four (4) 1/8" NPSF ports: Inlet. Normally open outlet. Exhaust. Normally closed outlet. Non-locking manual override button. 2’ lead wires. Buna rubber seals. When properly connected, if there is an interruption to the solenoid’s electrical power, the attached gate valve immediately closes and remains in the closed position until power is restored. The solenoid valve has a red manual override button. When properly connected, pushing the overide button forces the gate valve to open. When the override button is released the gate valve closes. Installation Instructions: Mount the solenoid on to the gate valve bonnet using the included mounting bracket and screws. When no tapped holes are present, the solenoid must be mounted remotely. Attach air line tubing between solenoid port #4 and the gate valve’s port which opens the gate valve (the port closest to the bonnet). Attach air line tubing between solenoid port #2 and the other gate valve port which closes the gate valve (the port at the top of the pneumatic cylinder. Optionally connect solenoid port #3 to house exhaust. Attach solenoid port #1 to (user supplied) house air at 80 psi. Apply 80 PSI air pressure to the solenoid valve and verify that the gate valve closes and remains closed. If the gate valve opens and remains open, switch the tubes to solenoid outlets 2 and 4. Press the manual overide switch and verify that the gate valve opens and remains open while the switch is pressed. Release the manual overide switch and verify that the gate valve closes again. With no electrical power applied, the solenoid will automatically be in the closed, locked position . When electrical power is applied to the solenoid, the gate valve will open.

Solenoid Kit for HVA Pneumatic Gate Valve, 24 VDC, Includes Mounting Bracket. This solenoid kit is for use with a HVA pneumatically operated gate valve. The solenoid operates the gate valve’s pneumatic piston. All fittings and connections must be leak-tight to ensure proper operation. These 24 VDC solenoid kits include a Humphrey 410 series, 4-way, direct-acting solenoid valve, and everything else needed to operate an UltraLock or HVA pneumatic gate valve including air line tubing push-to-connect fittings. For faster actuation of larger gate valves, larger tubing and different push-to-connect fittings may be used. Kit Components: 410 series 4-way solenoid valve. Mounting bracket for use with HVA pneumatic gate valves. Four (4) 4 mm OD tubing push-to-connect to 1/8" male universal pipe thread adapters. 4’ length of 4 mm OD flexible polyurethane tubing. Solenoid Valve Features: 24 VDC, 4.5 W. 125 PSIG maximum input pressure. 80 PSIG required for most pneumatic gate valves. Four (4) 1/8" NPSF ports: Inlet. Normally open outlet. Exhaust. Normally closed outlet. Non-locking manual override button. 2’ lead wires. Buna rubber seals. When properly connected, if there is an interruption to the solenoid’s electrical power, the attached gate valve immediately closes and remains in the closed position until power is restored. The solenoid valve has a red manual override button. When properly connected, pushing the overide button forces the gate valve to open. When the override button is released the gate valve closes. Installation Instructions: Mount the solenoid on to the gate valve bonnet using the included mounting bracket and screws. When no tapped holes are present, the solenoid must be mounted remotely. Attach air line tubing between solenoid port #4 and the gate valve’s port which opens the gate valve (the port closest to the bonnet). Attach air line tubing between solenoid port #2 and the other gate valve port which closes the gate valve (the port at the top of the pneumatic cylinder. Optionally connect solenoid port #3 to house exhaust. Attach solenoid port #1 to (user supplied) house air at 80 psi. Apply 80 PSI air pressure to the solenoid valve and verify that the gate valve closes and remains closed. If the gate valve opens and remains open, switch the tubes to solenoid outlets 2 and 4. Press the manual overide switch and verify that the gate valve opens and remains open while the switch is pressed. Release the manual overide switch and verify that the gate valve closes again. With no electrical power applied, the solenoid will automatically be in the closed, locked position . When electrical power is applied to the solenoid, the gate valve will open.

Replacement Open/Close Reed Switch for HVA Pneumatic Gate Valves. HVA Part Number: 07744. This is a replacement reed switch harness for HVA pneumatic valves. This single harness has both the OPEN and CLOSE reed switches, clearly marked. HVA part number 07744. HVA pneumatic gate valves are often found connected to turbo pumps in high or ultra high vacuum systems. If you are performing bakeout or other high temperature applications, we suggest using the HIGH TEMPERATURE reed switch harness replacement (part number P1012124).

Replacement Open/Close Reed Switch for HVA Pneumatic Gate Valves, HIGH TEMPERATURE. HVA Part Number: 07744HT. This is a replacement HIGH TEMPERATURE reed switch for HVA pneumatic valves built after 2004 which are rated for high temperatures (i.e., bakeout). Typically these high temperature rated valves and components are typically found in UHV systems, have Conflat fittings, and use copper sealing rings. This single harness has both the OPEN and CLOSE reed switches. Part number 07744HT.