Swagelok Tube Fitting, ¼ MNPT to ¼ Tubing Male Connector, Gaugeable, Monel Alloy 400/R-405. Swagelok Part Number: M-400-1-4. This Swagelok® male connector fitting connects 1/4 inch OD tubing to 1/4 inch male pipe threads (MNPT). The fitting is made of Monel alloy 400/R-405. A nut and ferrule set is included. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Monel is a nickel alloy composed primarily of nickel and coppper with small amounts of iron, manganese, carbon and silicon. It has high strength at elevated temperatures (up to 1000 degrees C) and is stronger than pure nickel. Monel is highly rust and corrosion resistant to salts and acids. R-405 includes a small amount of sulpher which aids in it being machined. Monel is a registered trademark of Special Metals Corporation. Male connectors are available for same-size pipe and tubing, or to adapt different sizes of pipe threads and tubing. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up metallic tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. These fittings offer consistent gaugeability upon initial installation and are easy to disconnect and retighten reliably. The two-ferrule design of these fittings are easy to install and no torque is transmitted to the tubing during installation. The two ferrules separate sealing and tube gripping functions; each ferrule is optimized for its function. Available Swagelok gap inspection gauges assure sufficient pull-up upon initial installation. Swagelok tube fitting ends are rated to the working pressure of tubing as listed in the Swagelok Tubing Data download. Swagelok-TM Swagelok Company

Swagelok Tube Fitting, 1/8 MNPT to 1/4 Tubing Male Connector, Gaugeable, Monel Alloy 400/R-405. Swagelok Part Number: M-400-1-2. This Swagelok® male connector fitting connects 1/4 inch OD tubing to 1/8 inch male pipe threads (MNPT). The fitting is made of Monel alloy 400/R-405. A nut and ferrule set is included. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Monel is a nickel alloy composed primarily of nickel and coppper with small amounts of iron, manganese, carbon and silicon. It has high strength at elevated temperatures (up to 1000 degrees C) and is stronger than pure nickel. Monel is highly rust and corrosion resistant to salts and acids. R-405 includes a small amount of sulpher which aids in it being machined. Monel is a registered trademark of Special Metals Corporation. Male connectors are available for same-size pipe and tubing, or to adapt different sizes of pipe threads and tubing. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up metallic tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. These fittings offer consistent gaugeability upon initial installation and are easy to disconnect and retighten reliably. The two-ferrule design of these fittings are easy to install and no torque is transmitted to the tubing during installation. The two ferrules separate sealing and tube gripping functions; each ferrule is optimized for its function. Available Swagelok gap inspection gauges assure sufficient pull-up upon initial installation. Swagelok tube fitting ends are rated to the working pressure of tubing as listed in the Swagelok Tubing Data download. Swagelok-TM Swagelok Company

Swagelok Tube Fitting, 1/8 FNPT to 1/4 Tubing, Female Connector, Gaugeable, Monel Alloy 400/R-405. Swagelok Part Number: M-400-7-2. This Swagelok® female connector fitting connects 1/4 inch OD tubing to 1/8 inch female pipe threads (FNPT). The fitting is made of Monel alloy 400/R-405. A nut and ferrule set is included. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Monel is a nickel alloy composed primarily of nickel and coppper with small amounts of iron, manganese, carbon and silicon. It has high strength at elevated temperatures (up to 1000 degrees C) and is stronger than pure nickel. Monel is highly rust and corrosion resistant to salts and acids. R-405 includes a small amount of sulpher which aids in it being machined. Monel is a registered trademark of Special Metals Corporation. Female connectors are available for same-size pipe and tubing, or to adapt different sizes of pipe threads and tubing. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up metallic tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. These fittings offer consistent gaugeability upon initial installation and are easy to disconnect and retighten reliably. The two-ferrule design of these fittings are easy to install and no torque is transmitted to the tubing during installation. The two ferrules separate sealing and tube gripping functions; each ferrule is optimized for its function. Available Swagelok gap inspection gauges assure sufficient pull-up upon initial installation. Swagelok tube fitting ends are rated to the working pressure of tubing as listed in the Swagelok Tubing Data download. Swagelok-TM Swagelok Company

Swagelok Tube Fitting, 1/4 FNPT to 1/4 Tubing, Female Connector, Gaugeable, Monel Alloy 400/R-405. Swagelok Part Number: M-400-7-4. This Swagelok® female connector fitting connects 1/4 inch OD tubing to 1/4 inch female pipe threads (FNPT). The fitting is made of Monel alloy 400/R-405. A nut and ferrule set is included. Nut threads are silver plated to prevent galling and seizing of the fitting when tightened. Monel is a nickel alloy composed primarily of nickel and coppper with small amounts of iron, manganese, carbon and silicon. It has high strength at elevated temperatures (up to 1000 degrees C) and is stronger than pure nickel. Monel is highly rust and corrosion resistant to salts and acids. R-405 includes a small amount of sulpher which aids in it being machined. Monel is a registered trademark of Special Metals Corporation. Female connectors are available for same-size pipe and tubing, or to adapt different sizes of pipe threads and tubing. These industry standard Swagelok compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up metallic tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. These fittings offer consistent gaugeability upon initial installation and are easy to disconnect and retighten reliably. The two-ferrule design of these fittings are easy to install and no torque is transmitted to the tubing during installation. The two ferrules separate sealing and tube gripping functions; each ferrule is optimized for its function. Available Swagelok gap inspection gauges assure sufficient pull-up upon initial installation. Swagelok tube fitting ends are rated to the working pressure of tubing as listed in the Swagelok Tubing Data download. Swagelok-TM Swagelok Company