Agilent MD1 Diaphragm Pump 3 Stage 1.4 M3h. - Ultimate Vacuum Pressure 1.1 Torr - 110-220 VACAgilent Part No. 9499432M001 (REPLACEMENT DIAPHRAGM PUMP for Agilent TPS FLEXY Systems) The MD 1 diaphragm pump is an excellent choice for oil-free evacuation and pumping of non-corrosive gases down to 1.5 mbar ultimate vacuum. The three-stage design with precisely guided flat diaphragms provides outstanding pumping speed even close to the ultimate vacuum, especially when compared with similarly rated two-stage diaphragm pumps. The MD 1 is an ultra-low vibration pump with very long diaphragm lilfetime and stable ultimate vacuum documented with years of testing. With a flow path consisting of aluminum and selected plastics (diaphragms and valves made of PTFE/FKM and FKM, respectively) the pumps are suitable for a wide range of applications with non-corrosive gases. This Pump is made by Vacuubrand and can be used stand alone or as a replacement for the Agilent TPS Flexy Systems.Easy to use and maintain. They are lightweight, portable and enable you to move them to wherever and whenever you need vacuum. Connect the pump to your system with a vacuum hose and setup is complete. This is a new pump and can be set up for either 110 or 220 VAC. Hose connections are KF16. A complete brochure in PDF format is available for download to the side.

Vacuubrand ME 8 NT Diaphragm Pump, CFM 4.8, Ultimate 52 Torr, 3/8 in Hose barb, 120 VAC, 734003 Vacuubrand Part No. 734003. These Vacuubrand ME-8 NT dry diaphragm pumps have an ultimate pressure of 52 Torr, a pumping speed of 4.8 CFM, a 3/8 inlet hose barb connection, have an exhaust silencer, operate on 1-Phase 110 to 120 VAC, and have Vacuubrand part number 734003. The Vacuubrand ME 8 NT pump is an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics, and allow a wide range of applications for non-corrosive gases. The highly flexible, fabric-reinforced double diaphragm made of FPM is ideal for extended operating life. These pumps with four heads provide very high pumping speed. And this new NT-series features improved performance data. Easy to use and maintain. They are lightweight, portable and enable you to move them to wherever and whenever you need vacuum. Connect the pump to your system with a vacuum hose and setup is complete. This is a new pump and set up for 115 Vac 60 Hz. Hose connections are 3/8 inch ID barb (10mm) style connectors. 3/8 inch ID (10mm) vacuum grade vinyl hose tubing is available on this website, Part No. P103304. Outlets are G 1/4 - 2 Silencers. A complete brochure in PDF format is available for download below.

Vacuubrand MD 4 NT Diaphragm Pump, CFM 2.5, 0.75 Torr Ultimate Pressure, Inlet Connection KF-16.Part Number 736005, (Substitute for the DISCONTINUED MZ4) These Vacuubrand MD-4 NT dry diaphragm pumps have an ultimate pressure of 0.75 Torr, a pumping speed of 2.5 CFM, a KF-16 inlet connection, include a 3/8 inlet hose barb, have an exhaust silencer, operate on 1-Phase 110 to 120 VAC, and have Vacuubrand part number 736005. The Vacuubrand MD 4 NT pump is an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics, and allow a wide range of applications for non-corrosive gases. The highly flexible, fabric-reinforced double diaphragm made of FPM is ideal for extended operating life. These pumps with four heads provide very high pumping speed. And this new NT-series features improved performance data.Easy to use and maintain. They are lightweight, portable and enable you to move them to wherever and whenever you need vacuum. Connect the pump to your system with a vacuum hose and setup is complete. This is a new pump and set up for 115 Vac 60 Hz. Hose connections are 3/8 inch ID barb (10mm) style connectors. 3/8 inch ID (10mm) vacuum grade vinyl hose tubing is available on this website, Part No. P103304. Outlets are G 1/4 - 2 Silencers. A complete technical data and application brochure in PDF format can be downloaded below.

Vacuubrand MD 4C NT CHEMICAL Diaphragm Pump, CFM 2.2, 1.1 Torr Ultimate Pressure, 10 mm barb inlet & outlet.Part Number 20736403. These Vacuubrand MD 4C NT dry CHEMICAL diaphragm pumps have an ultimate pressure of 1.1 Torr, a pumping speed of 2.2 CFM. They include hose barb inlet and outlet connections of 8-10 mm and have an exhaust silencer. They operate on 1-Phase 110 to 120 VAC, and have Vacuubrand part number 20736403. These three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance.Easy to use and maintain. They are lightweight, portable and enable you to move them to wherever and whenever you need vacuum. Connect the pump to your system with a vacuum hose and setup is complete. This is a new pump and set up for 115 Vac 60 Hz. Hose connections are 3/8 inch ID barb (10mm) style connectors. 3/8 inch ID (10mm) vacuum grade vinyl hose tubing is available on this website, Part No. P103304. Outlets are G 1/4 - 2 Silencers. A complete technical data and application brochure in .PDF format can be downloaded to the side at Downloads.