Inficon Inc. 6Mhz Gold Crystal Sensor, Cleanroom Dispenser, 10/Pack. Inficon Inc. Part Number 008-010-G10. INFICON 6 MHz crystals are used with all INFICON controllers and monitors. The 6 MHz crystals are available in gold, silver, or alloy electrodes and come in a variety of packages depending on your needs. The INFICON clean room quartz crystal package enables convenient dispensing of the crystals directly from the package to the sensor, minimizing operator handling and risk of contamination. To make the crystal package more cleanroom-friendly, we eliminated the paper and foam inserts and made the packages stackable for easy storage. Features Frequency: 6 MHz Diameter: 14 mm (0.550 inch) Front full pad Double anchor back electrode pattern Gold - recommended for general purpose, for processes with high heat loads,low film stress deposition e.g Au, Al, Ag Silver - recommended for processes with high heat loads, high-stress films e.g SiO2, Si3N4, W, Ta, Cr, Ni, AlN, TiN, ZnO, GaN, Mo, DLC Alloy - for optimizing optical/dielectric coatings e.g MgF2, SiO, TiO, HfO2 and other high stress applications Note that: The specific stress characteristics of these films can vary depending on the deposition method (e.g., sputtering, chemical vapor deposition, or atomic layer deposition) and the processing conditions. Controlling and understanding thin film stress is crucial for ensuring the reliability and performance of devices that incorporate these materials.

Inficon Inc. Quartz Monitor Crystals.6Mhz Alloy Crystal Sensor, Flat Pack Dispenser, 10/Pack. Part Number 750-1002-G10 Inficon Inc. INFICON 6 MHz crystals are used with all INFICON controllers and monitors. The 6 MHz crystals are available in gold, silver, or alloy electrodes and come in a variety of packages depending on your needs. The INFICON clean room quartz crystal package enables convenient dispensing of the crystals directly from the package to the sensor, minimizing operator handling and risk of contamination. To make the crystal package more cleanroom-friendly, we eliminated the paper and foam inserts and made the packages stackable for easy storage. Features Frequency: 6 MHz Diameter: 14 mm (0.550 inch) Front full pad Double anchor back electrode pattern Gold - recommended for general purpose, for processes with high heat loads,low film stress deposition e.g Au, Al, Ag Silver - recommended for processes with high heat loads, high-stress films e.g SiO2, Si3N4, W, Ta, Cr, Ni, AlN, TiN, ZnO, GaN, Mo, DLC Alloy - for optimizing optical/dielectric coatings e.g MgF2, SiO, TiO, HfO2 and other high stress applications Note that: The specific stress characteristics of these films can vary depending on the deposition method (e.g., sputtering, chemical vapor deposition, or atomic layer deposition) and the processing conditions. Controlling and understanding thin film stress is crucial for ensuring the reliability and performance of devices that incorporate these materials.

Inficon Inc. Quartz Monitor Crystals.6Mhz Silver Crystal Sensor, Cleanroom Dispenser, 10/Pack. Part Number 008-009-G10 Inficon Inc. INFICON 6 MHz crystals are used with all INFICON controllers and monitors. The 6 MHz crystals are available in gold, silver, or alloy electrodes and come in a variety of packages depending on your needs. The INFICON clean room quartz crystal package enables convenient dispensing of the crystals directly from the package to the sensor, minimizing operator handling and risk of contamination. To make the crystal package more cleanroom-friendly, we eliminated the paper and foam inserts and made the packages stackable for easy storage. Features Frequency: 6 MHz Diameter: 14 mm (0.550 inch) Front full pad Double anchor back electrode pattern Gold - recommended for general purpose, for processes with high heat loads,low film stress deposition e.g Au, Al, Ag Silver - recommended for processes with high heat loads, high-stress films e.g SiO2, Si3N4, W, Ta, Cr, Ni, AlN, TiN, ZnO, GaN, Mo, DLC Alloy - for optimizing optical/dielectric coatings e.g MgF2, SiO, TiO, HfO2 and other high stress applications Note that: The specific stress characteristics of these films can vary depending on the deposition method (e.g., sputtering, chemical vapor deposition, or atomic layer deposition) and the processing conditions. Controlling and understanding thin film stress is crucial for ensuring the reliability and performance of devices that incorporate these materials.

Inficon Inc. QCM Sensor, Single Front Load Sensor, 8-28 Inch length, Compression Fitting with 1 Inch Bolt Feedthrough. Inficon Inc. INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of the crystal holder in applications lacking sufficient room for side insertion. Assembled mechanically rather than soldered, parts can be replaced conveniently in the field, if necessary. Sensors can be ordered individually or in a sensor / feedthrough combination that can be either welded or assembled with compression fittings. Features Front load crystal holder Easy installation Available with 2.54 cm (1 inch) bolt feedthrough Adjustable length, comes with compression fittings Sensor / Feedthrough combinations available welded to customer specified lengths No brazing required, comes with compression fittings

Inficon Inc. QCM Sensor, Single Front Load Sensor, 8-28 Inch length, Compression Fitting with CF40 Flange Inficon Inc. INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of the crystal holder in applications lacking sufficient room for side insertion. Assembled mechanically rather than soldered, parts can be replaced conveniently in the field, if necessary. Sensors can be ordered individually or in a sensor / feedthrough combination that can be either welded or assembled with compression fittings. Features Front load crystal holder Easy installation Available with a CF40 Flange Adjustable length, comes with compression fittings Sensor / Feedthrough combinations available welded to customer specified lengths No brazing required, comes with compression fittings

Inficon Inc. QCM Sensor, Right Angle Single Front Load Sensor, 8-28 Inch length, Compression Fitting with 1 Inch Bolt Feedthrough. Inficon Inc. INFICON Right Angle Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The right angle front load design allows for easy insertion of the crystal holder in applications lacking sufficient room for side insertion. Assembled mechanically rather than soldered, parts can be replaced conveniently in the field, if necessary. Sensors can be ordered individually or in a sensor / feedthrough combination that can be either welded or assembled with compression fittings. Features Right angle front load crystal holder Easy installation Available with 2.54 cm (1 inch) bolt feedthrough Adjustable length, comes with compression fittings Sensor / Feedthrough combinations available welded to customer specified lengths No brazing required, comes with compression fittings

Inficon Inc. QCM Sensor, Right Angle Single Front Load Sensor, 8-28 Inch length, Compression Fitting with CF40 Flange. Inficon Inc. INFICON Right Angle Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The right angle front load design allows for easy insertion of the crystal holder in applications lacking sufficient room for side insertion. Assembled mechanically rather than soldered, parts can be replaced conveniently in the field, if necessary. Sensors can be ordered individually or in a sensor / feedthrough combination that can be either welded or assembled with compression fittings. Features Right angle front load crystal holder Easy installation Available with a CF40 Flange Adjustable length, comes with compression fittings Sensor / Feedthrough combinations available welded to customer specified lengths No brazing required, comes with compression fittings

Inficon Inc STM-2 USB Thin Film Rate, Thickness Monitor with Internal Oscillator. Inficon Inc. STM-2 combines the simplicity of USB connectivity with the accuracy of a precision measurement engine, all in a compact, inexpensive package. The size and simplicity of STM-2 help make setup and operation easy and efficient. Superior Performance STM-2 is the most accurate USB powered thin film monitor in the industry. Ten measurements are taken per second while achieving a resolution of 0.037 Å per measurement (density of 1). Easy and Flexible Installation STM-2 comes with everything you need to connect your QCM sensor/feedthrough to a Windows® PC. Simply connect the included BNC cable from the feedthrough to STM-2, then connect the STM-2 to your PC using a standard mini USB cable (included). No external oscillator or power supply is required. STM-2 features an internal oscillator that allows for simple and cost effective installation when STM-2 is located within 1 m (40 in.) of the quartz crystal. A standard INFICON® oscillator kit can be used for applications where STM-2 must be located farther away from the feedthrough. STM-2 Software STM-2 includes LabVIEW® software, capable of simple operation and data logging. Windows software is also included for operation and data logging of up to eight STM-2s simultaneously (each STM-2 requires a powered USB port). Please Note: The SMDP Server must be installed first for the STM-2 Windows Application Software or the STM-2 LabVIEW Application Software to function properly. Features Low cost instrument USB connection Internal oscillator High accuracy at 10 measurements per second Compatible with an external oscillator Includes software

Inficon Inc SQC-310C Deposition Controller, With RS232 & USB, Inficon PN SQC310C-4-R-1. Inficon Part Number: SQC310C-4-R-1. These Inficon SQC-310 Deposition Controllers have advanced electronics, an improved display, and a very affordable pricing. The INFICON SQC-310 Series gives you features not found on competitors’ thin film controllers. And you can choose the ideal model for your application: sequential deposition (SQC-310) or codeposition (SQC-310C). Bright, color LCD display - available in English or Chinese Standard RS-232 and USB (RS-232 and Ethernet optional) Easy setup and operation with a "Quick Setup" Menu, 6 context-sensitive push buttons, and convenient parameter setting knob Windows® program for developing, testing, and downloading processes, and for logging instrument data to your PC for process analysis and quality control Accurate process control, especially for low deposition rates, with ±0.03 Hz resolution at 10 readings/second Storage capacity for up to 100 processes, 1,000 layers, 50 films Monitoring of source material with a single sensor or with multiple sensors to provide accurate source distribution monitoring