6x12x12 Short Cube Modular Vacuum Chamber Basic Chamber Development Kit with KF Ports, 1/2 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble basic chamber development kit with KF-16, KF-25, and KF-40 ports. It includes everything needed to assemble a 0.5 cu. ft."short Cube" vacuum chamber including a 6 x 12 x 12 inch Cube frame, four 6 x 12 and two 12 x 12 inch Cube plates, all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates of a given size can be mounted to any similar frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 12 x 12 basic short Cube chamber development kit includes: 6 x 12 x 12 Cube frame (P108364) 6 x 12 x 12 Cube assembly hardware kit (P1010078, includes plate seals and mounting screws) One 6 x 12 Cube plate with three KF-25 ports (P108200) One 6 x 12 plate with one KF-40, one KF-25, two KF-16 ports (P108219) Two 6 x 12 blank plates (P108196) Two 12 x 12 blank plates (P108171) Rubber vibration isolating foot kit Centering rings, bulkhead clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube. ? ? ? ?

6x12x12 Short Cube Modular Vacuum Chamber Advanced Development Kit with with Viewing Window Door, KF, and ISO Ports, 1/2 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble advanced chamber development kit prepped with KF and ISO ports. It comes with an easy-to-open 12 x 12 door with viewing window. It includes everything needed to assemble a 0.5 cu. ft. vacuum chamber including a 6 x 12 x 12 inch Cube frame, four 6 x 12 plates, two 12 x 12 inch Cube plates (one is a door with viewing window), all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates of a given size can be mounted to any similar frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 12 x 12 advanced chamber development kit for high vacuum includes: 6 x 12 x 12 Cube frame (P108364) 6 x 12 x 12 Cube assembly hardware kit (P10100078, includes plate seals and mounting screws) One 6 x 12 plate with one KF-40, one KF-25, two KF-16 ports (P108219) One 6 x 12 plate with one ISO-F 63 port (P108199) Two 6 x 12 blank plates (P108196) One 12 x 12 door kit with tempered glass viewing window, hinges, and quick knobs for easy opening One 12 x 12 blank plate (P108171) Rubber vibration isolating foot kit Centering rings, KF bulkhead and ISO claw clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube. ? ?

6x12x12 Short Cube Modular Vacuum Chamber Heated Development Kit with Viewing Window Door, KF and ISO Ports, 1/2 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble heated chamber development kit prepped with KF and ISO-F ports. It comes with an easy-to-open 12 x 12 door with viewing window. It includes everything needed to assemble a 0.5 cu. ft. heated vacuum chamber including a 6 x 12 x 12 inch Cube frame, four 6 x 12 plates, one 12 x 12 heated plate, one 12 x 12 inch door with viewing window, all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates of a given size can be mounted to any similar frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 12 x 12 heated chamber development kit includes: 6 x 12 x 12 Cube frame (P108364) 6 x 12 x 12 Cube assembly hardware kit (P10100078, includes plate seals and mounting screws) One 6 x 12 plate with one KF-40, one KF-25, two KF-16 ports (P108219) One 6 x 12 plate with one ISO-F 63 port (P108199) Two 6 x 12 blank plates (P108196) One 12 x 12 door kit with tempered glass viewing window, hinges, and quick knobs for easy opening One 12 x 12 heater plate for up to 140°C (P108320) Offset rubber vibration isolating foot kit Centering rings, KF bulkhead and ISO claw clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube. ? ?

6x12x12 Short Cube Modular Vacuum Chamber Thermally Controlled Development Kit with Viewing Window Door, KF and ISO Ports, 1/2 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble thermally controlled chamber development kit prepped with KF and ISO-F ports. The kit comes with an easy-to-open 12 x 12 door with viewing window. It includes everything needed to assemble a 0.5 cu. ft. thermally controlled vacuum chamber including a 6 x 12 x 12 inch Cube frame, four 6 x 12 plates, and one 12 x 12 non-thermally isolated plate for circulating hot and cold fluids within the operating range of 150°C to -26°C (302°F to -15°F). A heated/cooled recirculating system is required. Fluid connections are 3/8" OD tubing. This kit also includes one 12 x 12 inch door with viewing window and all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates of a given size can be mounted to any similar frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 12 x 12 thermally controlled chamber development kit: 6 x 12 x 12 Cube frame (P108364) 6 x 12 x 12 Cube assembly hardware kit (P10100078, includes plate seals and mounting screws) One 6 x 12 plate with one KF-40, one KF-25, two KF-16 ports (P108219) One 6 x 12 plate with one ISO-F 63 port (P108199) Two 6 x 12 blank plates (P108196) One 12 x 12 door kit with tempered glass viewing window, hinges, and quick knobs for easy opening One 12 x 12 non-thermally insulated plate for circulating hot or cold fluids (P108474) Offset rubber vibration isolating foot kit Centering rings, KF bulkhead and ISO claw clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube. ? ?