Agilent Varian Turbo V 1001 涡轮泵套件配有 ISO-K 200 进样口、Turbo-V 1001 机架控制器和空气冷却套件。

Notes on the Agilent Varian TV1001 rack mount controller
These Agilent Varian TV1001 rack-mount turbo pump controllers can operate on 100, 120, 220, or 240 volts AC input power. A manually operated input voltage selector is integrated into the rack mount controller power supply input (see photo below). A flat-head screwdriver can be used to pop out the voltage selector box, rotate the voltage selector to the desired input voltage, and re-insert. The Agilent Varian TV1001 Navigator rack-mount turbo pump controllers also incorporate auxiliary power connectors (1 Amp max output) for powering the cooling fan and vent valve devices. These auxiliary connectors are located in the upper right-hand corner on back side of controller (see figure below). Warning, these auxiliary power connectors are not to be used to power the roughing pump, 1 Amp maximum output! The turbo pump to controller cable is integral being built into the Turbo-V 1001 rack-mount controller and is standard 10 foot length. A P1 connector on the back side of the rack-mount controller handles interlock an other logic (see photo below). A P1 interlock-jumped connector is provided with each new Turbo-V 1001 rack-mount controller and this connector must be in place to by-pass the interlock and allow the pump to start after installation.