Heim >

Modulare Vakuumkammern >

Platten, Rahmen und Teile >

Ideal Vakuum Würfelplatten 6x6 >

Vakuum Würfelplatten 6x6 >

Ideal Vacuum Cube 6 x 6 Thermally Isolated TVAC Chamber Plate for Liquid Nitrogen LN2 Cryogenic Cooling and High Vacuum Trap

Load

Ideal Vacuum Cube 6 x 6 Thermally Isolated TVAC Chamber Plate for Liquid Nitrogen LN2 Cryogenic Cooling and High Vacuum Trap

Zustand:

New

Artikelnummer:

P107301

Garantie:

Against Product Defect

Jetzt verfügbar 4

Verkauf: Fr. 957.74

Währung: Swiss Franc (CHF)

Beschreibung

Ideal Vacuum Cube 6 x 6 Thermal Vacuum TVAC Chamber Plate for Liquid Nitrogen LN2 Cryogenic Testing and High Vacuum Trap.

This is an Ideal Vacuum Cube 6 x 6 inch TVAC plate for cryogenic testing and for trapping condensable gas vapors under high vacuum such as water and solvents that outgas from components inside the vacuum. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. This TVAC plate produces lower base pressures and faster pump down cycles. This plate may be operated at temperatures as low as -200°C (-328°F)

The plate is mounted to the top of the Cube with the LN₂ fill port oriented vertically. Once under vacuum, liquid nitrogen is poured into the fill port and enters the plate’s 0.14 liter internal fluid reservoir.

The reservoir is made of 304L stainless steel with an optical bread board on the vacuum side with a surface area of approximately 45 in². It is designed to occupy minimal volume within the Cube.

The reservoir is thermally isolated from the blue powder coated 6061-T6 aluminum mounting plate and allows the plate to be operated to -200°C (-328°F) without compromising vacuum seal integrity.

Because the LN₂ continuously evaporates through the open fill port, it requires about 1 liter of LN₂ to cool the vacuum side of the plate to minimal temperature.

Features:

6" x 6" plate size
Blue powder coated 6061-T6 aluminum plate
304L stainless steel reservoir and fill port
Operating temperature to -196°C (-321°F)
45 in² internal surface area
Internal optical breadboard
Mounts horizontally on top of chamber only

Directly mounts to frame size:

6 x 6 x 6
6 x 6 x 12
6 x 12 x 12
6 x 6 x 6 hexagon
6 x 6 x 12 hexagon
6 x 6 x 12 octagon

This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Downloads

P107301 3D CAD SOLIDWORKS Model.sldprt

SLDPRT

P107301 3D CAD Parasolid Model.step

STEP

IVP Cube Broschüre 2019 v2 LG.pdf

27.74 MB, PDF

IVP Cube 6x6x6 Benutzerhandbuch.pdf

PDF

Ideal Vacuum Company Overview Brochure.pdf

8.16 MB, PDF

IVP Cube Plate Installationshandbuch.pdf

PDF

Broschüre

The Ideal Vacuum Cube^TM is a unique, modular, light weight, chamber system, capable of high vacuum to 1 x 10^-7 Torr. The Cube system is conceived to enable creativity and design flexibility in vacuum chamber system construction and limited only by your imagination.

The core of an Ideal Vacuum Cube modular chamber system is the Cube frame, machined from a single block of 6061-T6 aluminum alloy and reinforced with stainless steel threaded inserts. Many basic frame configurations are available and multiple Cubes can be joined together to create a virtually unlimited variety of long or odd-shaped chamber shapes. The Cube’s light weight construction makes it easy to transport around the lab or mounted to an optical table.

Cube plates are mounted with screws to each side of the Cube frame and sealed using our patented Taper-Seal^TM design, which provides protection of vacuum sealing surfaces and O-rings from damage or contamination.

An extensive number of interchangeable Cube plates are available and single or multiple plates can be swapped easily when chamber reconfiguration is needed. Plates are available with single and multiple port KF, CF, and ISO flanged plates for connections and feedthroughs, viewing windows and doors, and a variety of specialty plates for thermal and optical experiments. Most plates include an optical breadboard with 1/4-20 mounting threads spaced on a 1” x 1” standard grid on the plate’s vacuum side for fastening hardware and test objects. Plates may also have mounting threads on the exterior side for mounting accessories. Plates are typically machined from aluminum and receive a blue powder-coated outside finish which makes them both attractive and durable.

The modular nature of the Ideal Vacuum Cube allows the designer to configure a chamber to their unique requirements and reconfigure it at any time – all without the cost, weight, time, and limitations of an application-specific welded chamber.